Kaiyi UDRF01.04GB — 1.2.4 Fuel filter

12 1 Engine – 1.2.4 Fuel filter 1.2.4 Fuel filter page Fuel filter, changing (Volvo engine) DANGER Pay attention to the fire hazard when working on the fuel system. Avoid changing the fuel filter when the engine is hot. Fuel may spill on hot surfaces and may ignite. NOTE Avoid skin contact with fuel, use gloves. Fuel on hands may cause rashes and irritation. NOTE Do not fill the new fuel filter with fuel before installing. There is a risk that impurities may enter the fuel system, resulting in malfunctions or damage. 1 Machine in service position, see section B Safety . 2 Place a receptacle under the fuel filter. 3 Clean the area around the fuel filter.

4 Remove the fuel filter with filter tool. 5 Lubricate the O-ring on the new fuel filter with engine oil. 6 Fit the new fuel filter. 7 Bleed the fuel system, see Fuel system, bleeding (engine alter- native Volvo) page 9 . Tighten to contact and then another half to three-quarter turn. 8 Turn on the main electrical power and start the engine. Check that the fuel filter seals tight. 9 Turn off the engine and remove the receptacle. Handle the fuel as environmentally hazardous and inflammable waste. UDRF01.04GB Maintenance manual DRF 400–450