BAIC — BAIC Comanche Service Manual: Comprehensive Guide for PA-24 Series Aircraft

PIPER COMANCHE SERVICE MANUAL FIGURE 6-11. ALIGNING MAIN GEAR c. If the square contacts me rear side of the tire lcavinl a pp betwem it and the front side of the tire. the tire 15 toed-in. If a pp appan at the rear. the whee! is toed-out. d. To rectify toe-in or roc-out conditions. remove bolt connectinJ upper and lower torque links and remove or add spacers to move the wheel in desired direction. e. Re~eck the wheel a1i1nment. If the wheel alipmcnt is correct. safety the C&Rellated nut with a cotter pin. If the misalilnment scill exisa. sepuate the torque links and add another spacer to the torque links.

LI1'l'ut the number of spacers installed to allow for installation of the cotter pin in the bolt. 6·36. Removal Of MaiD Landini Gear Door A.mbly. a. Disconnect the rcuaction rod at the oleo smat by removing the attachina nut. washer and bolt. b. Remove the leal door by removing the screws anachint it to the bottom of the wi ... 6·37. Cleaning. Inspcr:tion And Rep ... a. Clean all partSwith a suitable solvent. b. Inspect retractIon rod for corrosion at the end bearings. c. Inspect doors ior cracks. dents. wom hingesand loose brackets. d. Repairs arc limltcd to replacement of pUts and minor skin repair. LANDING GEAR AND BRAKE SYSTEM ISSUED: 8/18/72 lJ7