TESTING AND ADJUSTING MEASURING EXHAUST GAS COLOR Press the brake pedal securely and keep your right foot on the decelerator pedal for safety until the work is fin- ished. 2) Stop only relieving the ripper and lower the exhaust temperature by only stalling the torque converter (Condition b in the figure). a If the temperature does not lower but rises, set the temperature in step 1). 3) After the temperature lowers and is stabi- lized, measure it (Condition c in the figure). MEASURING EXHAUST GAS COLOR a Measuring instrument for exhaust gas color When installing and removing the measuring instrument, take care not to touch a hot part.
a If an air source and a electric power source are not available in the field, use handy smoke checker C1 . When recording official data, use smoke meter C2 . a Measure the exhaust gas color under the follow- ing condition. Engine water temperature: Within operating range Just after the power train oil temperature gauge reads the red range, return the direc- tion of the PCCS lever into neutral and lower the power train oil temperature. 1. Measuring with handy smoke checker C1 1) Stock a sheet of filter paper to C1 . 2) Insert the exhaust gas intake pipe in the exhaust pipe. 3) Start the engine.
4) Accelerate the engine suddenly or run it at high idling and operate the handle of smoke checker C1 so that the filter paper will absorb the exhaust gas. 6. After finishing measurement, remove the mea- suring instrument and return the removed parts. 5) Remove the filter paper and compare it with the attached scale. 6) After finishing measurement, remove the measuring instrument and return the removed parts. D85EX-15 20-111 (1) Symbol Part No. Name C 1 799-201-9000 Handy smoke checker 2 Purchased Smoke meter