TESTING AND ADJUSTING MEASURING EXHAUST GAS COLOR 2. Measuring with smoke meter C2 1) Insert probe of smoke meter C2 in the outlet of the exhaust pipe and fix it to the exhaust pipe with a clip. 6) Start the engine. 7) Accelerate the engine suddenly or run it at high idling and press the accelerator pedal of smoke meter C2 and collect the exhaust gas into the filter paper. 8) Place the contaminated filter paper on the clean filter paper (at least 10 sheets) in the filter paper holder and read the indicated value. 9) After finishing measurement, remove the measuring instrument and return the removed parts.
2) Connect the probe hose, receptacle of the accelerator switch, and air hose to smoke meter C2 . a Limit the supplied air pressure to 1.5MPa {15kg/cm 2 }. 3) Connect the power cable to a receptacle of AC power supply. a Before connecting the cable, check that the power switch of the smoke meter is turned off. 4) Loosen the cap nut of the suction pump and fit the filter paper. a Fit the filter paper securely so that the exhaust gas will not leak. 5) Turn on the power switch of smoke meter C2 . 20-112 D85EX-15 (1)