Komatsu — SIMPLE METHOD OF TESTING BRAKE PERFORMANCE

TESTING AND ADJUSTING SIMPLE METHOD OF TESTING BRAKE PERFORMANCE SIMPLE METHOD OF TESTING BRAKE PERFORMANCE a Carry out the simple test of brake performance under the following condition. Power train oil temperature: Within operating range 1. Set the blade and ripper in the travel position on a level place. 2. Run the engine and set the parking brake lever in the FREE position. 3. Run the engine at low idling and press the brake pedal and set the PCCS lever in the FORWARD and 2nd gear speed position. If this test is carried out in the 1st gear posi- tion, the brake will be overloaded. Accord- ingly, be sure to carry out in the 2nd gear speed. a Set the steering unit in neutral. 4.

Press the decelerator pedal and set the fuel con- trol dial in the high idling position. 5. Return the decelerator pedal slowly and check that the machine does not start when the engine speed reaches the high idling level. Since the torque converter will be stalled, press the brake pedal securely and keep your right foot on the decelerator pedal for safety until the work is finished. D85EX-15 20-135 (1)