Komatsu — ADJUSTING BRAKE PEDAL

TESTING AND ADJUSTING ADJUSTING BRAKE PEDAL 5. When brake pedal (1) released, adijust its play with dimension e between the poins of rod assembly (8). Play of pedal: 1 – 5 mm (Center of pedal) Dimension e between pins of rod assembly: 1,125 mm a Adjust by turning joints (5) and (7) in the same direction. 6. With brake pedal (1) released, check that brake pedal (1) is in contact with damper (2). 7. Checking brake oil pressure 8. After adjusting the pedal, adjust the zero point of the brake potentiometer (Adjustment mode: 0005). a For the method of operation, see "Special functions of monitor panel (EMMS)".

D85EX-15 20-137 (1) Oil pressure MPa {kg/cm2} Remarks Brake OFF 2.84±0.10 {29±1} Engine at full throttle Brake ON 0