TESTING AND ADJUSTING EMERGENCY ESCAPE METHOD WHEN POWER TRAIN HAS TROUBLE 4) Start the engine and set the parking brake lever in the FREE position. 5) Operate switch assembly [1] and move the machine to a safe place. a The gear speed switch is so made that the switch on the lower gear speed will be operated first. 2. Escape with brake releasing device (Use H2) a If the engine cannot be started and the park- ing brake cannot be released, escape according to the following procedure. 1) Assemble pump assembly H2 . 2) Install volume pump [6] of pump assembly H2 to the outside of the operator’s cab.
3) Remove the fuel tank undercover and plug (4) (M18 x 1.5) of the brake release pressure supply port of brake valve (3). 20-140 D85EX-15 (1)