TESTING AND ADJUSTING TESTING AND ADJUSTING WORK EQUIPMENT AND HSS OIL PRESSURE TESTING AND ADJUSTING WORK EQUIPMENT AND HSS OIL PRESSURE a Testing and adjusting instruments for work equip- ment and HSS oil pressure Measuring 4) Run the engine at high idling and set the blade lever and ripper lever in neutral and measure the oil pressure. Stop the machine on a level place, lower the work equipment to the ground, and set the parking brake lever and safety lock lever in the LOCK position. a Measure the work equipment and HSS oil pres- sure under the following condition. Hydraulic oil temperature: Within operating range 1. Measuring unload pressure 1) Remove the main control valve cover.
2) Remove the oil pressure pickup plug. 5) After finishing measurement, remove the measuring instrument and return the removed parts. 3) Install nipple G2 and connect oil pressure gauge [1] of hydraulic tester G1 . a Use an oil pressure gauge of 39.2MPa {400kg/cm 2 }. 20-144 D85EX-15 (1) Symbol Part No. Name G 1 799-101-5002 Hydraulic tester 790-261-1203 Digital hydraulic tester 2 799-101-5220 Nipple (10 x 1.25mm) 07002-11023 O-ring