Komatsu — TESTING AND ADJUSTING WORK EQUIPMENT AND HSS OIL PRESSURE

TESTING AND ADJUSTING TESTING AND ADJUSTING WORK EQUIPMENT AND HSS OIL PRESSURE 3. Adjusting 1) LS pressure (Load sensing pressure) of work equipment Loosen locknut (4) of work equipment LS valve (3) and rotate adjustment screw (5) to adjust the LS pressure. a If the adjustment screw is rotated to the right, the oil pressure is heightened. rotated to the left, the oil pressure is lowered. a If the adjustment screw is rotated 1 turn, the pressure is heightened or lowered by 17.6 MPa {179 kg/cm 2 }. 2) LS pressure (Load sensing pressure) of HSS Loosen locknut (7) of HSS LS valve (6) and rotate adjustment screw (8) to adjust the LS pressure.

a If the adjustment screw is rotated to the right, the oil pressure is heightened. rotated to the left, the oil pressure is lowered. a If the adjustment screw is rotated 1 turn, the pressure is heightened or lowered by 15.1 MPa {154 kg/cm 2 }. Locknut: 68.6 – 78.5 Nm {7 – 8 kgm} After adjusting, check the relief pressure and LS pressure of work equipment again. Locknut: 29.4 – 39.2 Nm {3 – 4 kgm} After adjusting, check the relief pressure and LS pressure of work equipment again. 20-146 D85EX-15 (1)