TESTING AND ADJUSTING SPECIAL FUNCTIONS OF MONITOR PANEL (EMMS) [15] 9997: High idling limit mode This code is used to limit the use high idling speed. The limited speed (0 – 400) is displayed on the lower line. Limit range: High idling speed – –400rpm Using method: 1) Select a limit speed by setting information switch (5) in the [ > ] position or [ 2) Set buzzer cancel switch (4) in the [ ] posi- tion and check that the caution buzzer sounds. a If the high idling speed is limited, the engine speed is not raised to the normal high idling level even if the fuel control dial is controlled so. a Even if this code is turned off, the setting is effective. [16] 9998:
Gear speed limit mode This code is used to limit the use of the 3 gear speeds. The usable gear speeds are displayed by bits on the lower line (in the order of the 3rd, 2nd, and 1st from the left). Using method: Limit or allow the use of the maximum gear speed by operating information switch (5) and buzzer cancel switch (4). [ > ]: Do not prohibit shifting to 3rd gear speed. [ [ ]: Enter the selection. Display on lower line [o]: Gear speed is effective. Display on lower line [ ]: Gear speed is not effective. a If the use of a gear speed is limited, the transmission is not shifted to that gear speed even if the gear shift-up switch is operated.
a Even if this code is turned off, the setting is effective. 20-188 D85EX-15 (1)