Komatsu — E-7 WHILE THE ENGINE IS OPERATING, THE EMERGENCY WARNING ITEM FLASHES

TROUBLESHOOTING E-7 D85EX-15 20-613 (1) Trouble (2) • The engine water temperature caution lamp flashes. Related information • When any abnormality is detected during engine operation, the engine water temperature caution lamp will flash and sound the alarm buzzer. • The engine water temperature caution lamp flashes or goes out as it links with indication on the engine water temperature gauge. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Overheated engine water temperature (when the sys- tem is normal) As overheated engine water was detected, check the engine water temperature.

(When the water temperature is over 108°C, the lamp flashes.) 2 The engine water tempera- ture sensor system is defec- tive. (Engine controller system) Check the indication on the engine water temperature gauge. If the in- dication is abnormal, carry out the troubleshooting of “Indication on the engine water temperature gauge is abnormal.” Water temperature gauge aWater temperatures are guides for selecting indications. Water temperature lamp White range/ Green range Red range Goes out. Flashes. 3 Defective monitor panel When Causes 1 and 2 are not applicable, the monitor panel is sup- posed to be defective.

(This is an internal defect, which cannot be trou- bleshot.) Trouble (3) • The power train oil temperature caution lamp flashes. Related information • When any abnormality is detected during engine operation, the power tlain oil temperature caution lamp will flash and sound the alarm buzzer. • The power train oil temperature caution lamp flashes or goes out as it links with indication on the power train oil temperature gauge.

Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Overheated oil temperature of power train (when the system is normal) As an overheated power train oil temperature was detected, check the power train oil temperature. (When the oil temperature is over 130°C, the lamp flashes.) 2 The power train oil tempera- ture sensor system is defec- tive. (Monitor panel system) Check the indication on the power train oil temperature gauge.

If the indication is abnormal, carry out the troubleshooting of “Indication on the power train oil temperature gauge is abnormal.” Oil temperature gauge aOil temperatures are guides for selecting in- dications. Oil temperature lamp White range/ Green range Red range Goes out. Flashes. 3 Defective monitor panel When Causes 1 and 2 are not applicable, the monitor panel is sup- posed to be defective. (This is an internal defect, which cannot be trou- bleshot.)