Komatsu — E-7 WHILE THE ENGINE IS OPERATING, THE EMERGENCY WARNING ITEM FLASHES

TROUBLESHOOTING E-7 20-614 D85EX-15 (1) Trouble (4) • The hydraulic oil temperature caution lamp flashes. Related information • When any abnormality is detected during engine operation, the hydraulic oil temperature caution lamp will flash and sound the alarm buzzer. • The hydraulic oil temperature caution lamp flashes or goes out as it links with indication on the hydraulic oil temperature gauge. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Overheated hydraulic oil temperature (when the sys- tem is normal) As an overheated hydraulic oil temperature was detected, check the hydraulic oil temperature.

(When the oil temperature is over 130°C, the lamp flashes.) 2 The hydraulic oil tempera- ture sensor system is defec- tive. (Monitor panel system) Check the indication on the engine water temperature gauge. If the in- dication is abnormal, carry out the troubleshooting of “Indication on the hydraulic oil temperature gauge is abnormal.” Oil temperature gauge aOil temperatures are guides for selecting in- dications. Oil temperature lamp White range/ Green range Red range Goes out. Flashes. 3 Defective monitor panel When Causes 1 and 2 are not applicable, the monitor panel is sup- posed to be defective. (This is an internal defect, which cannot be trou- bleshot.)