TROUBLESHOOTING E-10 E-10 INDICATION OF THE POWER TRAIN TEMPERATURE GAUGE IS ABNORMAL. Circuit diagram related to power train oil temperature sensor 20-618 D85EX-15 (1) Trouble • Indication of the power train temperature gauge is abnormal. Related information • Signals of the power train oil temperature sensor are sent and received through communication by the monitor panel. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting T tu 1 (I s he power train oil tempera- re sensor is defective.
nternal disconnection or hort circuit) aPrepare with the starting switch OFF, then carry out troubleshooting without turning the starting switch ON. 453 (male) Torque converter o temperature il Resistance Between (1) and (2) 10 – 100°C About 3.8k – about 80kz Min. 1Mz Between (1) and ground D n 2 in c isconnection of wiring har- ess (Disconnection in wir- g or defective contact in onnector) aPrepare with the starting switch OFF, then carry out troubleshooting without turning the starting switch ON. Wiring harness between S04 (female) (12) a 453 (female) (1) nd Resistance Max. 1z Wiring harness between 453 (female) (2) an S03 (female) (3) d Resistance Max.
1z G 3 n ci round fault of wiring har- ess (Contact with ground rcuit) aPrepare with the starting switch OFF, then carry out troubleshooting without turning the starting switch ON. Between wiring harness (between S04 (fema (12) and 453 (female) (1)) and ground le) Resistance Min. 1Mz H 4 h ci ot short circuit of wiring arness (Contact with 24V rcuit) aPrepare with the starting switch OFF, then turn the starting switch ON and carry out troubleshooting. Between wiring harness (between S04 (fema (12) and 453 (female) (1)) and ground le) Voltage Max. 1V 5 D efective monitor panel aPrepare with the starting switch OFF, then carry out troubleshooting without turning the starting switch ON.
S04 (female) Torque converter o temperature il Resistance Between (12) and ground 10 – 100°C About 3.8k – about 80kz