Komatsu — H-17 EXCESSIVE HYDRAULIC DRIFT OR BLADE TILT

TROUBLESHOOTING H-16, H-17 H-16 EXCESSIVE HYDRAULIC DRIFT OF BLADE LIFT E-17 EXCESSIVE HYDRAULIC DRIFT OF BLADE TILT D85EX-15 20-713 (1) Trouble • Excessive hydraulic drift of blade lift. Related information • Confirm whether the blade is remodeled. • Confirm that no oil leaks the circuits in the work equipment before troubleshooting. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective seal of blade lift operation valve (Spool) Prepare with starting the engine, then stop the engine for troubleshoot- ing. Follow the procedure below for troubleshooting.

If the hydraulic drift speed becomes high, the spool seal of the blade lift operation valve is assumed to be defective. 1. Prop up the machine using the blade lift, and lift the front of the ma- chine. 2. Stop the engine, and release the safety lock lever. 3. Set the blade lever to the lift lowering side, and confirm how the phenomenon changes. 2 Defective seal of blade lift cylinder The seal of the blade lift cylinder is assumed to be defective; directly check it. 3 Defective fitting perfor- mance of quick drop valve Raise the blade about 1,000 mm and check lowering of the tip of the blade cutting edge. • 300 mm/15 min Trouble • Excessive hydraulic drift of blade tilt.

Related information • Confirm whether the blade is remodeled. • Confirm that no oil leaks the circuits in the work equipment before troubleshooting. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective seal of blade tilt operation valve (Spool) aPrepare with starting the engine, then stop the engine for trouble- shooting. Follow the procedure below for troubleshooting. If the hydraulic drift speed becomes high, the spool seal of the blade tilt operation valve is assumed to be defective. 1. Prop up the machine using the blade tilt, and lift the right of the ma- chine. 2.

Stop the engine, and release the safety lock lever. 3. Set the blade lever to the right tilt side, and confirm how the phe- nomenon changes. 2 Defective seal of blade tilt cylinder aPrepare with starting switch OFF, then drive the engine in high idling mode for troubleshooting. Blade tilt cylinder Cylinder leak quantity Right tilt stroke end 16cc/min