Komatsu — INSTALLATION

DISASSEMBLY AND ASSEMBLY FUEL INJECTOR [*9] a Install fuel injector assembly (22) according to the following procedure. 1) Insert gasket (b) and O-ring in fuel injector (a). 2) Insert holder (d) in fuel injector (a) and install them to the rocker housing temporarily. a Matching the injector key to the key way of the rocker housing, insert the injector securely until its sealing face touches the sealing face of the cylinder head. 3) Apply engine oil to the spherical part of the spherical washer (e). 4) Tighten holder mounting bolt (f). 3 Holder mounting bolt: 58.5 – 73.5 {6 – 7.5 kgm} Checking for fuel leakage Check for fuel leakage.

For details, see TEST- ING AND ADJUSTING, Releasing residual pres- sure from fuel system. Bleeding air Bleed air from the fuel circuit. For details, see TESTING AND ADJUSTING, Bleeding air from fuel circuit. 30-20 D85EX-15 (2)