DISASSEMBLY AND ASSEMBLY NOZZLE TIP REMOVAL AND INSTALLATION OF NOZZLE TIP a [EPA Regulation] In a country where EPA Regulation is applied, replace the nozzle of the common rail engine by the assembly. In a country where EPA Regula- tion is not applied, however, only the nozzle tip can be replaced according to the following pro- cedure. (EPA: Environ mental Protection Agency) 3. Using 19-mm deep socket [3], loosen retaining nut (4). SPECIAL TOOL 4. Remove retaining nut (4) from injector assembly (3). REMOVAL 1. Grip tool A5 with vise [1]. a Do not grip the injector directly with the vise. 5. Lift up and remove nozzle assembly (5) verti- cally. a Do not remove tip guide (6).
(The tip guide cannot be disassembled.) a Take care that dirt will not stick to the parts. 2. Set injector assembly (3) to tool A5 . D85EX-15 30-21 (5) Symbol Part No. Part name Necessity Q'ty New/Remodel Sketch A5 795T-471-1550 Wrench t 1 Q