Komatsu — REMOVAL

DISASSEMBLY AND ASSEMBLY DAMPER REMOVAL AND INSTALLATION OF DAMPER ASSEMBLY REMOVAL k Disconnect the cable from the negative (–) ter- minal of the battery. 7. Remove rubber cover (3). 1. Remove the engine hood assembly. For details, see REMOVAL OF ENGINE HOOD ASSEMBLY. 2. Remove the operator's cab assembly. For details, see REMOVAL OF OPERATOR'S CAB ASSEMBLY. 3. Remove the floor frame assembly. For details, see REMOVAL OF FLOOR FRAME ASSEMBLY. 4. Open undercover (1). 8. Loosen clamp (4) of damper oil level detection pipe. 5. Drain the oil from the damper chamber. 6 Oil in damper chamber: Approx. 1.5 l 9.

Disconnect breather hose (5) and remove oil level detection pipe (6) and breather hose together. a Move the oil level detection pipe aside. 6. Remove universal joint assembly (2). [*1] D85EX-15 30-47 (2)