DISASSEMBLY AND ASSEMBLY HSS 6) Install collar (73) and snap ring (70). 7) Install hub and carrier assembly (64) to hub (54) and tighten bolts (89). 6. Brake and carrier assembly Assembly of carrier assembly 1) Install bushing (91) to carrier (90). 3 Mounting bolt: 59 – 74 Nm {6 – 7.5 kgm} Assembly of brake assembly 1) Install stopper (56) to the hub, then install snap ring (58). 2) Install bushing (60) to hub (39). 2) Install bearing (69) to gear (52). Fit thrust washers (67) to top and bottom of the bear- ing, then set them to the carrier. 3) Install shaft (66), matching the inside of the thrust washers and bearing to the shaft hole of the carrier. a Match the roll pin hole accurately.
4) Install roll pin (65). 3) Install hub (39) to hub (54) with 18 mounting bolts. 3 Mounting bolt: 59 – 74 Nm {6 – 7.5 kgm} 5) Set hub (92) to ring gear (52) and install snap ring (50). 6) Install hub (92) to carrier assembly (64). 30-88 D85EX-15 (2)