DISASSEMBLY AND ASSEMBLY HSS 4) Install bearing (57) to hub (39). 5) Install snap ring (59). 9) Install the seal ring to piston (43). 10) Install piston (43), aligning counter bore b having "assembly match mark a " with "13.5- drill" c and opposite side d having the drilled hole of the hydraulic circuit. 6) Set brake drum (45) to hub (39). 7) Install discs (46), plates (47), and springs (48). 8) Install seal rings (27) and (53) and cage (51). a Roughly match the oil holes on the cage to the 4 oil holes on the drum. a Press fit the cage to the outer race side of the bearing. 11) Install spring (42). 12) Install guide bolt [14] to cage (51). 13) Install bearing (60) to cover (41).
D85EX-15 30-89 (2)