Komatsu — ASSEMBLY

DISASSEMBLY AND ASSEMBLY TORQUE CONVERTER 4. Gear and input shaft 1) Press fit bearing (6) to input shaft (4). 2) Install snap ring (5). 3) Install gear and input shaft (4) to case assembly (10) and tighten bolts (3). 2 Mounting bolt: Adhesive (LT-2) 3 Mounting bolt: 98 – 122.5 Nm {10 – 12.5 kgm} 5. Case and turbine assembly 1) Using eyebolts [1] and matching the case groove to the drain plug, install case and tur- bine assembly (1) and tighten 30 mounting bolts (2). 2 Mounting bolt: Adhesive (LT-2) 3 Mounting bolt: 49 – 58.8 Nm {5 – 6 kgm} 2) Install the drain plug. 3 Mounting bolt: 9.8 – 12.74 Nm {1.0 – 1.3 kgm} D85EX-15 30-103 (2)