Komatsu — REMOVAL AND INSTALLATION

DISASSEMBLY AND ASSEMBLY SCAVENGING PUMP REMOVAL AND INSTALLATION OF SCAVENGING PUMP ASSEMBLY REMOVAL 5. Remove 2 mounting bolts (4) and scavenging pump assembly (5). k Disconnect the cable from the negative (–) ter- minal of the battery. 1. Open undercover (1). INSTALLATION 2. Drain the power train oil. Carry out installation in the reverse order to removal. 6 Power train case: Approx. 100 l 3. Disconnect suction tube (2). Refilling with oil Add oil through the oil filler to the specified level. Run the engine to circulate the oil through the system. Then, check the oil level again. 5 Power train case: Approx. 100 l 4. Disconnect discharge hose (3). 30-104 D85EX-15 (2)