Komatsu — ASSEMBLY

DISASSEMBLY AND ASSEMBLY FINAL DRIVE 3. Hub and case assembly 1) Install oil sump plate (36) to case (34). a When installing the plate, press it against faces a and b of the case. 4) Using tool J5 , press fit 2 bearing outer races (32C) to hub (33). Press fitting force for outer race: 2 – 15 kN {0.2 – 1.5 tons} 2 Mounting bolt: Adhesive (LT-2) 5) Using eyebolts, set hub assembly (31) to the shaft. 6) Set bearing (32A) to the shaft. 2) Using tool J5 , press fit bearing (32B) to case (34). Press fitting force for bearing: 13 – 26 kN {1.3 – 2.6 tons} 3) Install collar (35). 7) Using tool J5 , press fit bearing (32A) to case (34). Press fitting force for bearing:

13 – 26 kN {1.3 – 2.6 tons} D85EX-15 30-119 (2)