Komatsu — ASSEMBLY

DISASSEMBLY AND ASSEMBLY FINAL DRIVE 8) Install plate (30). 2 Mounting bolt: Adhesive (LT-2) 11) Install sun gear (27) and thrust (26). 3 Mounting bolt: 230 – 289 Nm {23.5 – 29.5 kgm} 4. Carrier assembly a Since each bearing of the planetary gear is an assembly, match the identification marks of the inner race, outer race, and spacer when assembling. 1) Using tool J5 , press fit bearing outer race (25C) to planetary gear (24). Press fitting force for bearing: 10 – 35 kN {1.0 – 3.6 tons} 9) Using eyebolts, install gear (29). 10) Tighten gear mounting bolts (28). 2 Mounting bolt: Adhesive (LT-2) 3 Mounting bolt:

230 – 289 Nm {23.5 – 29.5 kgm} 2) Install bearings (25A) and (25B) and spacer (25D) to planetary gear (24). 30-120 D85EX-15 (2)