Komatsu — ASSEMBLY

DISASSEMBLY AND ASSEMBLY RECOIL SPRING 6. Install lubricator (20) to cylinder (18), and then install lock plate (19). 9. Assembly of yoke and piston assembly 1) Using push tool [2] and a press, press fit pis- ton (11) to yoke (10). Press fitting force for yoke: 392 kN {40 tons} 2) Install washer (9) and plate (8) and tighten bolt (7). a Bend washer (9) securely. 3) Install ring (6), packing (5), ring (4), and snap ring (3). 2 Packing and ring: Grease (G2-LI) 7. Assembly of holder 1) Press fit bushing (17) to holder (14) and install seal (16). Press fitting force for bushing: 19.6 – 29.4 kN {2.0 – 3.0 tons} 2 Bushing and oil seal: Grease (G2-LI) 2) Install cover (15) to holder (14). 10.

Install yoke and piston assembly (2) to recoil spring assembly (1). 8. Install holder (14) to recoil spring case (13). 30-138 D85EX-15 (2)