Komatsu — DISASSEMBLY

DISASSEMBLY AND ASSEMBLY TRACK ROLLER DISASSEMBLY AND ASSEMBLY OF TRACK ROLLER ASSEMBLY SPECIAL TOOLS 5. Remove collar (3), floating seal (5), (6) and O- ring on the opposite side, similarly to steps 2) – 4). 6. Remove mounting bolt (8) of bushing (7). DISASSEMBLY 1. Remove the oil filler plug and drain the oil. 6 Idler: 0.26 – 0.29 l 2. Set track roller assembly (1) on the block [1]. Using push puller [2], push in collar (3) and then remove ring (4) and collar (3). 7. Set track roller assembly (1) on a block and push the end of shaft (9) to pull out bushing (7) and remove the O-ring. 3. Remove floating seal (5) from collar (3). 4.

Remove floating seal (6) and O-ring from track roller assembly (1). 8. Turn over track roller assembly (1) and set it on the block and push the end of shaft (9) to pull out bushing (7) and remove the O-ring on the oppo- site side. 30-140 D85EX-15 (2) Symbol Part No. Part name Necessity Q'ty New/Remodel Sketch N 1 791-651-1510 Inst aller t 1 2 791-601-1000 Oil pump t 1