DISASSEMBLY AND ASSEMBLY TRACK SHOE EXPANSION AND INSTALLATION OF TRACK SHOE ASSEMBLY CHECK BEFORE EXPANDING TRACK SHOE ASSEMBLY k Since it may be very dangerous to expand the track shoe assembly, check the following items in advance. EXPANSION OF TRACK SHOE ASSEMBLY (Ordinary) a If any abnormality is not detected by CHECK BEFORE EXPANDING TRACK SHOE ASSEM- BLY, perform the following procedure. k Do not loosen the lubricator more than 1 turn. If the grease is not discharged well, move the machine forward and in reverse. 1. Set master link (3) in position. a Set the master link above the idler (a little after the center of the idler).
a Set blocks [1] and [2] between the front side of the idler and carrier roller so that the mat- ing part of the master link will not open until the master bolt is pulled out. 1. Remove cover (1) and loosen lubricator (2) of the adjustment cylinder to discharge the grease. k Do not loosen the lubricator more than 1 turn. 2. After the shoe is loosened, perform EXPANSION OF TRACK SHOE ASSEMBLY (Ordinary). 3. If the track shoe is not loosened by the above work, perform EXPANSION OF TRACK SHOE ASSEMBLY (When track frame has internal trou- ble).
a The track frame may have an internal trouble (damage of the recoil spring or recoil spring set bolt, fall of the shaft end nut, etc.) D85EX-15 30-147 (2)