Komatsu — WHOLE DISASSEMBLY

DISASSEMBLY AND ASSEMBLY TRACK SHOE WHOLE DISASSEMBLY AND ASSEMBLY OF TRACK SHOE SPECIAL TOOLS a When moving the shoe assembly, take care not to damage the master link. a If it is obliged to cut a shoe nut with gas, keep the seal temperature below 80°C to prevent thermal deterioration of the seal and take measures to prevent the spatters from entering through the clearances among the links. 2. Disassembly of link 1) Set the link assembly on a link press and hit it with a hammer so that the bushing will be fitted to the jaw [1]. a If the link tread, outside of the bushing, etc.

are worn, adjust the height of jaw [1] or guide plate to align both disassem- bling jigs [2] and [3] with the pin and bushing so that the link hole will not be damaged when the link is assembled. a If the pin and bushing are not aligned well, the link hole may be damaged and the pin and bushing may be broken dur- ing disassembly work. a For the whole disassembly of the track shoe, see "Parts judgment guide, Undercarriage, Lubri- cated track" and "Parts judgment guide, Under- carriage, Reversing procedure for lubricated track". WHOLE DISASSEMBLY 1. Removal of shoe Sling the shoe assembly and set it with the shoe up on the floor and remove the shoe by using a shoe bolt impact wrench.

a If a shoe bolt is not loosened after it is unscrewed by 1 turn (If its torque is not reduced to 0), loosen the other bolts first, and it will be removed smoothly. a If a shoe bolt is turned forcibly while its torque is not 0, it and link will adhere to each other and they will need to be repaired. 30-150 D85EX-15 (2) Symbol Part No.

Part name Necessity Q'ty New/Remodel Sketch R 1 791-650-3000 Remover and installer t 1 790-101-1300 Cylinder assembly t 1 790-105-2300 Jack assembly t 1 790-101-1102 Hydraulic pump t 1 2 791-650-3500 Remover and installer t 1 791-675-5542 Adapter t 1 791-675-5571 Adapter t 1 790-101-1300 Cylinder assembly t 1 790-105-2300 Jack assembly t 1 790-101-1102 Hydraulic pump t 1 3 791-646-7531 Push tool t 1 4 791-660-7460 Pin puller t 1 5 791-646-7900 Plug push tool t 1 • 790-434-1210 • Bar 1 • 790-434-1220 • Guide 1 791-646-7523 Bar t 1 791-646-7590 Guide t 1 6 791-632-1060 Installer t 1 7 790-701-3000 Seal checker t 1 8 791-646-8002 Lubricator t 1