DISASSEMBLY AND ASSEMBLY HYDRAULIC CYLINDER Blade tilt and ripper lift cylinders 1) Set piston rod assembly (23) to tool U1 . 2) Using tool U3 , remove nut (24) from the cyl- inder. 3) Remove piston assembly (25) from piston rod (23). 2) Disassemble the head assembly according to the following procedure. i) Remove O-ring (29) and backup ring (30). ii) Remove snap ring (31) and dust seal (32). iii) Remove packing (33) and bushing (34). 4) Remove wear ring (26) and piston ring (27) form the piston assembly. 4. Head assembly 1) Remove head assembly (7) or (10) from pis- ton rod (8) or (11). 30-180 D85EX-15 (2)