DISASSEMBLY AND ASSEMBLY RIPPER 9. Sling lift cylinder assembly (3) temporarily and remove the lock bolt of pin (8). 11. Sling arm (9) and remove stand [1]. 12. Pull out pin (8) and remove arm (9). a Pull out pin (8) to a position at which you can remove arm (9). 10. Pull out pin (8) and remove lift cylinder assembly (3). a Pull out pin (8) to a position at which you can remove the lift cylinder assembly. a Remove the lift cylinder assembly on the opposite side. 4 Arm: 345 kg 4 Lift cylinder assembly: 87 kg 13. Sling bracket (10) temporarily and remove 4 bolt (11), 2 nuts (12), and bracket (10). a Remove the bracket on the opposite side similarly. 4 Bracket: 107 kg 30-186 D85EX-15 (2)