STRUCTURE, FUNCTION AND MAINTENANCE STANDARD HYDRAULIC, HSS PUMP (3) Operation in minimum direction for pump discharge amount The following explains the situation if servo piston (1) moves to the left (the discharge amount becomes smaller). When LS pressure PLS becomes larger (for example, when the area of opening of the control valve becomes smaller and pump pressure PP rises), pump pressure PP pushes spool (4) to the left. When spool (4) moves, main pump pressure PP flows from port d to port c , and from port h , it enters the large piston diameter end.
Main pump pressure PP also enters the small piston diameter end, but because of the difference in area between the large pis- ton diameter end of servo piston (1) and the small piston diameter end, servo piston (1) is pushed to the left. As a result, rod (2) moves in the direction to make the swash plate angle smaller. D85EX-15 10-53