STRUCTURE, FUNCTION AND MAINTENANCE STANDARD HYDRAULIC, HSS PUMP (4) When servo piston is balanced Let us take the area receiving the pressure at the large piston diameter end as A1 , the area receiving the pressure at the small diameter end as A0 , and the pressure flowing into the large piston diameter end as Pen . If the main pump pressure PP of the LS valve and the combined force of force F of spring (3) and LS pressure PLS are bal- anced, and the relationship is A0 x PP = A1 x Pen . The servo piston (1) will stop in that position, and the swash plate will be kept at an inter- mediate position.
(It will stop at a position where the opening from port b to port c and from port d to port c of spool (4) is approxi- mately the same.) At this point, the relationship between the area receiving the pressure at both ends of piston (1) is A0 : A1 = 1:2, so the pressure applied to both ends of the piston when it is balanced becomes PP : Pen Pen 2:1. The position where spool (4) is balanced and stopped is the standard center, and the force of spring (3) is adjusted so that it is deter- mined when PP PLS = 1.96 MPa {20 kg/ cm 2 }. 10-54 D85EX-15