SEN00604-00 10 Structure, function and maintenance standard Lubrication relief valve 1 Unit: mm 2. F clutch housing 3. R clutch housing 4. Piston Outline q The oil leaving the torque converter passes through the power train oil cooler built in the radiator lower tank. It then goes through the lubrication relief valve and lubricates the trans- mission and PTO. A: From oil cooler B: Drain C: Drain q The lubrication relief valve is installed to the right side face of the F clutch housing. It keeps the lubricating oil pressure below the set pres- sure. Normal pressure (MPa{kg/cm 2 }) 0.14 ± 0.05 {1.4 ± 0.5} Specified value Cracking pressure (MPa{kg/cm 2 }) 0.30 ± 0.03 {3.0 ± 0.3} 48 D155AX-6 No.
Check item Criteria Remedy 1 Lubrication relief valve spring Standard size Installation Installation Free length length load 12.5 N 26 23.6 {1.27 kg} Repair limit Replace Installation length Installation load Free length Installation load 23.6 12.5 N {1.27 kg} 25.2 11.9 N {1.21 kg}