SEN00679-01 30 Testing and adjusting Measuring exhaust gas color 1 a Measuring instruments for exhaust gas color k Stop the machine on level ground, lower the work equipment to the ground, stop the engine, and set the parking brake lever and work equipment lock lever in the lock posi- tion. k Be careful not to touch any hot part of the engine when removing or installing the measuring tools. a If an air source and an electric power source are not available in the field, use handy smoke checker C1 . When recording official data, use smoke meter C2 . a Measure the exhaust gas color under the fol- lowing condition.
2) Connect the probe hose, receptacle of the accelerator switch, and air hose to smoke meter C2 . a Limit the supplied air pressure to 1.5 MPa {15 kg/cmІ}. 3) Connect the power cable to a receptacle of AC 100 V. a Before connecting the cable, check that the power switch of the smoke meter is turned OFF. 4) Loosen the cap nut of the suction pump and fit the filter paper. a Fit the filter paper securely so that the exhaust gas will not leak. 5) Turn power switch of smoke meter C2 ON. q Engine coolant temperature: Within oper- ating range 1. Measuring with handy smoke checker C1 1) Stick a sheet of filter paper to smoke checker C1 . 2) Insert the exhaust gas intake pipe in exhaust pipe (1).
3) Start the engine. 4) Accelerate the engine suddenly or run it at high idle and operate the handle of smoke checker C1 so that the filter paper will absorb the exhaust gas. 6) Start the engine. 7) Accelerate the engine suddenly or run it at high idle and press the accelerator pedal of smoke meter C2 and collect the exhaust gas into the filter paper. 8) Place the contaminated filter paper on the clean filter paper (at least 10 sheets) in the filter paper holder and read the indicated value. 9) After finishing measurement, remove the measuring instrument and return the removed parts. 5) Remove the filter paper and compare it with the attached scale.
6) After finishing measurement, remove the measuring instrument and return the removed parts. 2. Measuring with smoke meter C2 1) Insert probe [1] of smoke meter C2 in the outlet of exhaust pipe (1) and fix it to the exhaust pipe with a clip. 10 D155AX-6 Symbol Part No. Part name C 1 799-201-9001 Handy smoke checker 2 Commercially available Smoke meter