Komatsu D155AX-6 — MEASURING COMPRESSION PRESSURE

SEN00679-01 30 Testing and adjusting Measuring compression pressure 1 a Disconnect the terminal of the injector wir- ing harness on the injector side and the bracket on the rocker housing side and remove the injector wiring harness (Loosen the 2 terminal nuts alternately). a Pass a wire under the fuel path projected sideways and pull up the injector (Do not pry the injector top up). a Measuring tools for compression pressure k Stop the machine on level ground, lower the work equipment to the ground, stop the engine, and set the parking brake lever and work equipment lock lever in the lock posi- tion.

a When measuring the compression pressure, take care not to burn yourself on the exhaust manifold, muffler, etc. or get caught in a rotat- ing part. a Measure the compression pressure under the following conditions. q Engine oil temperature: 40 – 60 °C 1. Remove the engine hood assembly and air cleaner together. 5. Install adapter E2 to the mounting hole on the injector and connect compression gauge E1 . a Be sure to fit the gasket to the injector end. a Fix the adapter with the injector holder. 4 Engine hood assembly: 170 kg 2. Remove cylinder head cover (1) of the cylinder to measure the compression pressure. 3 Holder mounting bolt:

58.8 – 73.5 Nm {6.0 – 7.5 kgm} a Apply a little amount of engine oil to the connecting parts of the adapter and gauge so that air will not leak easily. 6. Install rocker arm assembly (2) and adjust the valve clearance. 3 Rocker arm mounting bolt: 93 – 103 Nm {9.5 – 10.5 kgm} a See Adjusting valve clearance. 3. Bring the cylinder to be tested to the compres- sion top dead center and remove rocker arm assembly (2). a For the procedure for bringing each cylin- der to the compression top dead center, see Adjusting valve clearance. 4. Disconnect fuel high-pressure tube (3) and injector wiring harness (4) and remove injector (5) and wiring harness. 12 D155AX-6 Symbol Part No.

Part name E 1 795-502-1590 Compression gauge 2 795-471-1330 Adapter 6261-71-6150 Gasket