SEN00679-01 30 Testing and adjusting Measuring fuel circuit for leakage 1 9. Check the fuel piping and devices for fuel leak- age. a Check mainly around the high-pressure circuit parts coated with the color checker for fuel leakage. a If any fuel leakage is detected, repair it and inspect again from step 1. a If no fuel leakage is detected, inspection is completed. k Very high pressure is generated in the high- pressure circuit of the fuel system. If fuel leaks while the engine is running, it is dan- gerous since it can catch fire. a After testing the fuel system or removing and installing its parts, test it for fuel leakage according to the following procedure.
a Clean and degrease the engine and the parts around it in advance so that you can test it eas- ily for fuel leakage. 1. Spray color checker (developer) over the joints of the fuel supply pump, common rail, fuel injector, and high-pressure piping. 2. Run the engine at speed below 1,000 rpm and stop it after its speed is stabilized. 3. Check the fuel piping and devices for fuel leak- age. a Check mainly around the high-pressure circuit parts coated with the color checker for fuel leakage. a If any fuel leakage is detected, repair it and inspect again from step 1. 4. Run the engine at low idle. 5. Check the fuel piping and devices for fuel leak- age.
a Check mainly around the high-pressure circuit parts coated with the color checker for fuel leakage. a If any fuel leakage is detected, repair it and inspect again from step 1. 6. Run the engine at high idle. 7. Check the fuel piping and devices for fuel leak- age. a Check mainly around the high-pressure circuit parts coated with the color checker for fuel leakage. a If any fuel leakage is detected, repair it and inspect again from step 1. 8. Run the engine at high idle and load it. a Relieve the ripper circuit by raising the rip- per. 24 D155AX-6