Komatsu D155AX-6 — MEASURING FAN CIRCUIT OIL PRESSURE

SEN00679-01 30 Testing and adjusting Measuring fan circuit oil pressure 1 a Measuring instruments for fan circuit oil pres- sure k Stop the machine on level ground, lower the work equipment to the ground, stop the engine, and set the parking brake lever and work equipment lock lever in the lock posi- tion. a Measure the fan circuit oil pressure under the following condition. 5. Close the radiator mask. k Before starting the engine, be sure to close the radiator mask. Do not start the engine while the radiator mask is open. q Hydraulic oil temperature: Within operat- ing range 6. Start the engine and set the machine monitor to Adjusting function of the service mode. a Adjustment code:

1005 (Fan 100% mode) a For the operating method, see "Special functions of machine monitor (EMMS)". a If this adjustment code is displayed, the fan speed is kept at 100% speed in accor- dance with the engine speed, regardless of the state of the machine. 1. Open the radiator mask and remove the fan net. 2. Disconnect supply hose (1) of the fan motor. 3. Install adapter L2 and connect the discon- nected hose again. 4. Install nipple L3 and connect it to oil pressure gauge [2]. a When using an analog oil pressure gauge, use one of 39.2 MPa {400 kg/cmІ}. 28 D155AX-6 Symbol Part No.

Part name L 1 799-101-5002 Hydraulic tester 790-261-1204 Digital hydraulic tester 2 799-401-3400 Adapter (05) 3 799-101-5220 Nipple (10 x 1.25 mm) 07002-11023 O-ring