SEN00679-01 30 Testing and adjusting Adjusting fuel control dial and decelerator pedal 1 k Stop the machine on level ground, lower the work equipment to the ground, stop the engine, and set the parking brake lever and work equipment lock lever in the lock posi- tion. 1. Outline of fuel control system q The following signals are input as rotation command signals to the engine controller. 1) Fuel control dial potentiometer signal 2) Decelerator pedal potentiometer sig- nal 3) 3rd throttle signal (Power train con- troller) q The engine controller controls the fuel control system of the engine (CRI system) according to the one of the above input signals which indicates the lowest engine speed.
DIAL: Fuel control dial PEDAL: Decelerator pedal ROD: Decelerator pedal rod POTENTIO: Decelerator pedal potentiometer ENG-ECU: Engine controller P/T-ECU: Power train controller ENGINE: Engine unit (CRI devices) [KOMNET]: KOMNET communication circuit (3rd throttle signal) q Adjust the decelerator pedal speed and high idle speed with the decelerator pedal linkage. 30 D155AX-6