SEN00680-01 30 Testing and adjusting 4. Measuring transmission forward clutch pressure (F) 1) Connect oil pressure gauge [1] of hydrau- lic tester M to oil pressure pickup plug (4). a When using an analog oil pressure gauge, use one of 5.9 MPa {60 kg/ cmІ}. 6) After finishing measurement, remove the measuring instruments and return the removed parts. 5. Measuring transmission reverse clutch pressure (R) 1) Connect oil pressure gauge [1] of hydrau- lic tester M to oil pressure pickup plug (5). a When using an analog oil pressure gauge, use one of 5.9 MPa {60 kg/ cmІ}. 2) Start the engine and set the parking brake lever in the FREE position.
3) Set the gearshift mode and preset range as follows with the gearshift mode selector switch and shiftup or shiftdown switch. q Gearshift mode: Manual gearshift (Ripping) 2) Start the engine and set the parking brake lever in the FREE position. 3) Set the gearshift mode and preset range as follows with the gearshift mode selector switch and shiftup or shiftdown switch. q Preset range: F2-R2 4) While pressing the brake pedal, set the direction of PCCS lever in the forward position and shift up the gear to the 3rd gear speed with the shiftup switch. a Keep the steering system in neutral. a Check that [F3] is displayed in the gear speed display section.
5) While running the engine at high idle, measure the forward clutch pressure. q Gearshift mode: Manual gearshift (Ripping) q Preset range: F2-R2 4) While pressing the brake pedal, set the direction of PCCS lever in the reverse position and shift up the gear to the 3rd gear speed with the shiftup switch. k Since the torque converter is stalled, keep pressing the brake pedal securely and keep your right foot on the decelerator pedal for safety until the work is finished. q Keep the steering system in neutral. q Check that [R3] is displayed in the gear speed display section. 5) While running the engine at high idle, measure the reverse clutch pressure.
k Since the torque converter is stalled, keep pressing the brake pedal securely and keep your right foot on the decelerator pedal for safety until the work is finished. 6 D155AX-6