SEN00681-01 30 Testing and adjusting Adjustment ID: 8009 (Ripper tilt lever neutral posi- tion adjustment) Adjustment ID: 8010 (Ripper tilt lever max. IN posi- tion adjustment) q This adjustment code is used to make the work equipment controller recognize the neutral position of the tilt potentiometer of the ripper control lever. a After the work equipment controller or ripper control lever is replaced, be sure to carry out this adjustment once. q This adjustment code is used to make the work equipment controller recognize the maximum IN position of the tilt potentiometer of the ripper control lever.
a After the work equipment controller or ripper control lever is replaced, be sure to carry out this adjustment once. q Functions of function switches [F3]: Unused [F4]: Unused [F5]: Return to adjustment item selecting screen (ID inputting screen) [F6]: Save adjustment value q Functions of function switches [F3]: Unused [F4]: Unused [F5]: Return to adjustment item selecting screen (ID inputting screen) [F6]: Save adjustment value q Operating method 1) Check that the ripper control lever is in the neutral position of the tilting direction and keep it in that position. 2) Press [F6] and check that the alarm buzzer sounds.
a Even if the adjustment is carried out, the displayed value does not change. a Even if this adjustment code is turned off, the adjustment is effective. a This adjustment code is used to make the controller recognize the neutral position of the potentiometer. It is not used to adjust the sensitivity of the ripper control lever. q Operating method 1) Operate the ripper control lever to the IN stroke end of the tilting direction and keep it in that position. 2) Press [F6] and check that the alarm buzzer sounds. a Even if the adjustment is carried out, the displayed value does not change. a Even if this adjustment code is turned off, the adjustment is effective.
a This adjustment code is used to make the controller recognize the maximum IN posi- tion of the potentiometer. It is not used to adjust the sensitivity of the ripper control lever. 64 D155AX-6