Komatsu — CHECKS BEFORE STARTING

Remark If breather hole (3) on the cap is clogged, the pressure in the tank will drop and fuel will not flow. Clean the hole from time to time. OPERATION CHECK WORK LAMPS Check to be sure the working lamps and lamps inside the instruments light up properly. Check also that there is no dirt or damage. If any lamp does not light up, the bulb is probably blown up or there is a disconnection, so ask your Komatsu distributor to carry out repairs. 1. Turn the ignition switch to the ON position. 2. Set the lamp switch to ON position (a) and check to be sure the working lamp lights up. CHECK FUNCTION OF HORN 1. Turn the ignition switch to the ON position. 2.

Confirm that the horn sounds immediately when the horn button is pressed. 3. If the horn does not sound, contact your Komatsu distributor for repair. PC300LC/HD-7E0 2-79