Komatsu — CHECK AND TIGHTEN TRACK SHOE BOLTS

MAINTENANCE CHECK AND TIGHTEN TRACK SHOE BOLTS If the machine is used with loose track shoe bolts (1), they will break, so tighten any loose bolts immediately. TIGHTENING TRACK SHOE BOLTS 1. First tighten to a torque of 392 ± 39 Nm (289 ± 28 ft/lbs) then check to be sure the nut and shoe are in close contact with the link contact surface. 2. After checking, tighten further 120є ± 10є. ORDER FOR TIGHTENING Tighten the bolts in the order shown in the diagram on the right. After tightening, check to be sure the nut and shoe are in close contact with the link mating surface. 3-28 PC300LC/HD-7E0