. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE 8. Close air bleeding valve (2). 4 - 40 9. Start th e e ngine. I f the eng ine does not start, t ry a gain by following 1) Check that air bleeding valve (2 ) is closed 2) Tilt electric priming pum p switch (3) to t he ON position 3) Try to start the engine while the electric primin g pump is in operation. If the engine still does not start, wait for approx. 2 minutes, and then repeat steps 2 ) and 3) 4) After the e ngine started the engine approx. completely NOTICE Do not keep the starting motor rot ating continuously for mor e tha n 20 seconds.
If the engine wi ll not star t, wait for at least 2 minutes before t rying to start the