. MAINTENANCE SERVICE PROCEDURE REPLACE FUEL PREFILTER CARTRIDGE WARNING 1. Close supply valve (1) of the fuel tank. to remove it. 4 - 65 After the engine has been o perated, all parts are at high temperature, so do not replace the filter im mediately. Wait for all parts to cool down before startin High pressure is generated inside the engine fuel piping system When replacing the filter, w ait for at least 30 seconds after stopping the engine to let the interna l pressure go down before replacing the filter. Do not bring any fire or fla NOTICE Genuine Komatsu fuel filte r cartridges use a special filter that has highly efficient filtering ability .
When replacing the filter cartridge, always use a gen uine Komatsu part. The common rail fuel inject ion system used on this machine c onsists of more precise parts than the conventional injection pump and nozzle. If any part other than a gen uine Komatsu filter cartridge is used, dust or dirt may get in and cause problems with the injection system. Always avoid usin g substitute parts. When carrying out inspecti on or maintenance of the fuel system , pay more attention than normal t o the entry of dirt. If dirt is stuck to any part, use fuel t o wash it off completely. Prepare a container to c 2. Set the container to cat 3.
Remove transparent cu p (3) from the filter and inspect it broken or damaged, re 4. Using a filter wrench, t