HOW-TO SECTION Fully Formulated Antifreeze Contains all the necessary inhibitors to protect a diesel engine and does not, therefore, require a pre-charge of SCA before its first use. Required specifications for water, ethylene glycol, propylene glycol, inhibitor packages and inhibitor concentration are included in this publication. To avoid possible engine damage from inadequate or over-concentrated coolant, this publication should be read thoroughly before replacing coolant. NOTICE: Initial–Fill Coolant — The coolant that is used in a new or rebuilt engine, or any time the cooling system is emptied and then refilled with new coolant. OAT — Organic Acid Technology:
An inhibitor system based on organic acid inhibitors. SCA Supplemental Coolant Additive SCAs are used in a preventive maintenance program to prevent corrosion, cavitation and the formation of deposits. Approved Coolants The approved and preferred coolants for MBE 4000 are .Listed in Table 12. Once installed, these coolants should be maintained according to the procedures discussed under Maintenance in this section. 100 All information subject to change without notice. DDC-SVC-MAN-0041 Copyright © 2009 DETROIT DIESEL CORPORATION