MAN — Man EPA07 MBE 4000 Engine Operator's Manual

EPA07 MBE 4000 OPERATOR'S MANUAL 1 Preferred Coolant 2 Water-only coolant systems offer no freeze protection and should not be used where ambient temperatures can fall to 32° F (0° C). Table 12 Initial Fill Coolant Options Ethylene Glycol / Water + CONVENTIONAL CORROSION Inhibitor, propylene Glycol / Water + CONVENTIONAL CORROSION Inhibitor These products are available as Fully Formulated, Phosphate-Free, Extended Service Interval (ESI) coolants. They are commercially available from Detroit Diesel (recommended) and other manufacturers as either a concentrated antifreeze or as a pre-mixed antifreeze.

The pre-mixed antifreeze is ready to use, while the concentrated coolant must be mixed with water prior to use. commercial brands of ethylene glycol are used, they must be equivalent to Power Cool . Detroit Diesel does not market a propylene glycol coolant. If a propylene glycol coolant is used, it must also meet the following requirements: Fully formulated ethylene glycol-based, low silicate antifreeze or coolant must meet TMC RP-329 “Type requirements. Fully formulated propylene glycol-based, low silicate antifreeze or coolant must meet TMC RP-330 “Type requirements. Detroit Diesel Power Cool ® Engine Coolant (P/N 23512138) is the preferred ethylene glycol coolant as Listed in Table 12.

If other All information subject to change without notice. 101 DDC-SVC-MAN-0041 Copyright © 2009 DETROIT DIESEL CORPORATION Coolant Fill Option Product Ethylene Glycol and Water + Conventional Corrosion Inhibitors 1 DDC Power Cool Commercial Equivalent of DDC Power Cool Fully Formulated TMC RP-329 Type A Antifreeze and Water Propylene Glycol and Water + Conventional Corrosion Inhibitors 1 Fully formulated TMC RP-330 "Type A" Antifreeze and Water Ethylene Glycol & Water + OAT Inhibitors DDC Power Cool Plus Water Only + Conventional Corrosion Inhibitors 2 Water + DDC Power Cool 3000 Water Only + OAT Inhibitors 2 Water + DDC Power Cool Plus 6000