MAN — Man EPA07 MBE 4000 Engine Operator's Manual

EPA07 MBE 4000 OPERATOR'S MANUAL 7. Insert a new filter element into the cap. 8. Insert the element and cap assembly into the housing. Torque the cap to 25 N·m (18 lb·ft). 9. Drain the oil from the oil pan. [a] Place a suitable receptacle beneath the oil drain plug on the underside of the oil pan. 1. Oil Filter Cap 3. Oil Filter Housing 2. O-ring [b] Carefully unscrew the oil drain plug on the oil pan and allow the oil to drain out (See Figure 34). Figure 33 Oil Filter Element FIRE To avoid injury from fire, keep open flames, sparks, electrical resistance heating elements, or other potential ignition sources away when draining lubrication oil. Do not smoke when draining lubricating oil. 4.

Remove the element by pressing and twisting the side and detaching it from the cap. Figure 34 Engine Oil Drain Plug, Oil Pan [c] Discard the O-ring on the oil drain plug. 5. Remove the oil filter O-ring and discard it. Lightly grease a new O-ring with engine oil and install it on the filter cap. 10. Install the oil drain plug, using a new O-ring. Tighten the plug to 65 N·m (48 lb·ft). 6. Check the filter housing for any debris. All information subject to change without notice. 85 DDC-SVC-MAN-0041 Copyright © 2009 DETROIT DIESEL CORPORATION