HOW-TO SECTION PERSONAL INJURY To avoid injury from slipping and falling, immediately clean up any spilled liquids. 11. Add new engine oil through the oil fill tube (See Figure 35) until the maximum fill level on the oil dipstick has been reached.Listed in Table 11 are the engine fill capacities. Figure 35 Oil Fill Tube Table 11 Engine Lubricating Oil Capacity NOTICE: Keep the engine running at idling speed until an oil pressure reading is obtained. If no oil pressure is shown after approximately 10 seconds, stop the engine and determine the cause. Failure to do so could result in engine damage.
To avoid injury when working near or on an operating engine, remove loose items of clothing, jewelry, tie back or contain long hair that could be caught in any moving part causing injury. 13. Check the filter and oil drain plug for signs of leakage. 12. Start the engine with the accelerator pedal in the idle position. Monitor the oil pressure gauge. 14. Stop the engine. Check the oil level again after approximately five minutes. If necessary, add oil 86 All information subject to change without notice. DDC-SVC-MAN-0041 Copyright © 2009 DETROIT DIESEL CORPORATION Oil Pan Capacity Engine Oil System Fill Capacity (Includes oil filter) 36 L (38 qts) 39.5 L (41.7 qts)