Komatsu — 3.2.5 MACHINE CONTROLS

INSTRUMENTS AND CONTROLS The buttons that control the hydraulic equipment are identified by AUX1 - AUX2, as shown in the illustration. IMPORTANT After connecting the pipes to the equipment, the operator must try the AUX1 - AUX2 buttons to verify the directions of rotation or the movements produced by each individual push of the buttons. Before starting work, the operator must check the corre- spondence between the AUX buttons and the directions of movement of the equipment, since the person who con- nected the pipes may have inverted the connections. pressed; in this way, all the power developed by the engine can be used by the hydraulic system.

The transmission remains disconnected as long as the but- ton is kept pressed. This function can be used with any gear engaged. 98 DANGER AUX 1 AUX 2 RKAA0624 RKAA0624 DANGER 6-4 TRANSMISSION DECLUTCH PUSH BUTTON DANGER • Avoid using this button when the machine works or travels on slopes. This button is used in TRAVEL-WORK and TRAVEL operat- ing modes when heavy loads must be lifted and therefore all the hydraulic power developed by the machine must be avail- able. The transmission is disconnected by keeping this button (C) C RKAA0830 DANGER