EQUIPMENT 3.12.4 ORGANIZING THE WORK AREA If after a first inspection the area results to be uneven, encum- bered with big obstacles or made up of areas with considerable differences in height, it is advisable to level the ground as much as possible before starting work. These preliminary operations will reduce the time necessary to carry out the job and will ensure better results, in terms of both operator’s stress and machine service life. Reduce to the minimum the movements of the machine that are necessary to carry out the job. RKA02410 3.12.5 OPERATING THE EQUIPMENT Always fasten the safety belt. Always warn the authorised persons present on the work site, by sounding the horn.
IMPORTANT The illustrations shown are the basic ones that are necessary for a correct use and exploitation of the machine; the operator must get familiar with the controls and the operation method described and learn to organize work in a free area, using the low gears and remaining seated in driving position. The methods described are the traditional and safest methods for operation with machine fitted with forks and bucket. The operating methods to be adopted with other equipment are described in the section that deals with optional equipment. 148 DANGER