Komatsu — 4.7.2.f CHECKING THE TYRE PRESSURE

MAINTENANCE PLAN 4.7.2.e CHECKING THE ENGINE OIL LEVEL ature. (See «4.3 FUEL, COOLANT AND LUBRICANTS»). IMPORTANT If it is necessary to check the oil level during or soon after work, stop the engine and wait 15 minutes before carrying out the check. 4.7.2.f CHECKING THE TYRE PRESSURE TECHNICAL DATA»). While checking the tyre pressure, check also the conditions of the tread and sidewalls. 198 DANGER • Soon after the machine has been stopped, the engine is very hot and may cause burns; let the engine cool down before carrying out any check. The dipstick (1) can be reached after opening the engine hood. The oil level must be checked with cold engine and the machine parked on level ground.

The oil level must be checked on the graduated dipstick (1) and it must be included between the MIN. and MAX. marks; if the level is near the MIN. mark, top up with oil of the type specified in the lubricant table for the ambient temper- MAX. MIN. DANGER • When inflating a tyre, the operator must stand in front of the tread. • Do not exceed the pressure values indicated in the TECH- NICAL DATA. This check is indispensable to preserve the tyres, keep them effi- cient over time and make them last longer and is also very impor- tant to ensure safety. Pressure must be as prescribed in the specifications. (See «5.1 RKA01010